System Description - SSANGYONG Rexton Y200 Manual

5D1-8 PART TIME - T/C

SYSTEM DESCRIPTION

Transfer Case Control Unit (TCCU)
TCCU is located under the front left handed seat and
permits the vehicle to shift from two-wheel drive to
four-wheel drive (and back shift) according to drivers
switch operation during driving (For the shifting
between 4WD HIGH and 4WD LOW, stop the vehicle).
YAD5D050
1. Shifting from 2H to 4H
•
Position the transfer case switch from '2H' to
' 4 H ' .
•
Shifting is possible during driving.
•
'4WD Hl' indicator light will turn on.
2. Shifting from 4H to 2H
•
Position the transfer case switch from '4H' to
' 2 H ' .
•
Shifting is possible during driving.
•
4WD Hl' indicator light will turn off.
YAD5D060
3. Shifting between 4H and 4L
•
Shifting is possible when the vehicle is almost
stopped (below approx. 2 km/h), so it would be
better stop the vehicle.
•
In case of manual transmission equipped
vehicle, apply clutch pedal.
•
In case of auto transmission equipped vehicle,
put the lever position into 'N'.
•
Position the transfer case switch '4H' to '4L'
or '4L' to '4H'.
•
According to the shifted position, indicator light
will turn on.
YAD5D070
Notice: If there are malfunctions during shifting,
'4H' or '4L' indicator light will blink.
SSANGYONG Y200