Clutch Pedal Box - SSANGYONG Rexton Y200 Manual

5C-14 CLUTCH
•
Apply the grease to the connecting portion
between the clevis pin and the turnover spring.
YAD5C230
•
Check the clutch pedal height after connecting
the pedal and the push rod. Align the height
according to the "A" free play of the push rod.
YAD5C240

CLUTCH PEDAL BOX

Removal & Installation Procedure
1. Remove the clutch master cylinder.
2. Remove the upper bolt from the clutch pedal box
and remove the clutch pedal assembly.
YAD5C250
3. Installation should follow the removal procedure
in the reverse order.
Notice: Charge the clutch oil as specified and then
bleed the system.
YAD5C260
SSANGYONG Y200