SSANGYONG Rexton Y200 Manual page 1107

SSANGYONG Y200
MANUAL TRANSMISSION 5B-21
Pre-Installation Checks Checking Procedure
1. Separate the clutch release fork from the pivot and
remove the pivot from the clutch housing.
2. Check the pivot. Fork and release bearing.
3. Check the pressure plate spring.
YAD5B350
Notice: Inspect each parts and replace the
excessively worn parts.
4. Check the clutch housing alignment as follows :
YAD5B360
•
Place the magnetic base on the pressure plate
spring.
•
Check the housing bore alignment.
YAD5B370
- Place the dial indicator on the bore.
- By rotating the crankshaft one revolution,
record the dial indicator reading.
YAD5B380