SSANGYONG Y200
BLEEDING OF CLUTCH SYSTEM
Notice: Keep the fluid level over MAX in reservoir
during bleeding operation.
Do not let fluid contact a painted surface.
1. Remove the air bolt cap of the release cylinder.
Connect a vinyl tube to the bolt.
2. Insert the other end of the tube in a vacant
container.
3. Slowly depress the clutch pedal several times.
4. With clutch pedal fully depressed, open the air
bolt and release air rind fluid in the fluid line,
YAD5C030
5. Repeat this procedure until there are no more air
bubbles in the fluid flows.
YAD5C040
CLUTCH 5C-3