Clutch Pedal - SSANGYONG Rexton Y200 Manual

Hide thumbs Also See for Rexton Y200:

Table of Contents

5C-16 CLUTCH

4. Concentric Slave Cylinder

Check any heat damage, abnormal noise, poor

rotation and wear of the concentric slave

cylinder bearing.

CLUTCH PEDAL

1. Pedal Stroke (A).

Notice: To adjust the pedal stroke, loosen the lock

nut (H) of the interlock switch (G) and turn the two

lock auto until the stroke is correct.

2. Pedal Height (B).

Height (From the Floor

Notice: To adjust the pedal height, loosen the lock

nut (C) of the stopper bolt(D) and turn the stopper

bolt until the height is correct.

3. Pedal Free Play (E).

Notice: To adjust the pedal free play, loosen the

lock nut (F) of the master cylinder and turn the

push rod until the free play is correct.

4. Check the fulcrum pin and the bushing for wear,

the pedal for bending and the spring for damage.

SSANGYONG Y200

Table of Contents