SSANGYONG Rexton Y200 Manual page 1113

SSANGYONG Y200
MANUAL TRANSMISSION 5B-27
18. Remove the 5th synchronizer assembly with its
fork and rail assembly from the counter shaft.
YAD5B590
19. Remove the slip yoke snap ring from the main
shaft.
YAD5B600
20. Remove the 5th speed drive gear snap ring from
the main shaft.
YAD5B610
21. Make alignment marks on the case and input
bearing retainer and remove the 4 input shaft
bearing retainer bolts, using a 13 mm wrench.
Remove the input bearing retainer with the bearing
outer race and shim.
Notice: Apply sealer on these bolts during
assembly.
YAD5B620