OIL DIPSTICK GUIDE TUBE
1 Oil Dipstick Level Gauge
2 Oil Dipstick Guide Tube
Removal & Installation Procedure
1. Pull out the oil dipstick level gauge (1).
2. Remove the bolt (4) in the upper intake manifold and remove
the oil dipstick guide tube.
Installation Notice
Tightening Torque
3. Install new O-ring to the dipstick guide tube.
4. Installation should follow the removal procedure in the
reverse order.
5. Check for leaks by starting the engine.
M162 ENGINE MECHANICAL 1B1-103
3 O-ring
4 Bolt (M6 x 12, 1 piece) ........................... 9-11 Nm
9 - 11 Nm