Oil Pump - Removal And Installation - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

DI05-14
OIL PUMP
1. Oil pump
2. Plunger
3. Compression spring
4. Guide pin
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
5. Screw plug ...................................................... 50 Nm
6. Combination bolt ................................... 23 ± 2.3 Nm
7. Oil strainer

Oil Pump - Removal and Installation

1. Remove the oil pan.
Tightening torque
M6 x 20 (24 EA)
M6 x 35 (2 EA)
M6 x 85 (2 EA)
M8 x 40 (4 EA)
Y220_05018
2. Remove the oil pump.
3. Remove the screw plugs and the relief valve.
4. Install in the reverse order of removal.
5. Start the engine and check for oil leaks.
Y220_05019
Y220_05017
Nm
10 ± 1.0
10 ± 1.0
10 ± 1.0
25 ± 2.5
LUBRICATION SYSTEM
DI ENG SM - 2004.4