Cylinder Head Guide Rail - SSANGYONG Musso Sports N100 2003 Manual

CYLINDER HEAD GUIDE RAIL

Preceding Work : Removal of cylinder head cover
Tools Required
104 589 01 01 00 Spanner
Removal & Installation Procedure
1. Remove the chain tensioner (1).
2. Turn the exhaust camshaft to the camshaft rotating direction
using the wrench (4) and loosen the timing chain at upper
guide rail (2).
3. Pull out the upper guide rail pin from the guide rail (2).
4. Turn the exhaust camshaft to the opposite direction of
rotation using the wrench (4, special tool : 104 589 01 01
00).
5. Check for damages at the upper sliding rail and replace it if
necessary. Install the upper guide rail pin.
6. Install the chain tensioner.
Installation Notice
Tightening Torque
Screw Plug
Tensioner Assembly 72 - 88 Nm
M162 ENGINE MECHANICAL 1B1-81
1 Chain Tensioner
2 Upper Guide Rail
3 Upper Guide Rail Pin
4 Wrench (Special Tool)
40 Nm