Percentage Scale Of Dc Ma Measurement - Keysight U1401B User's And Service Manual

3 Making Measurements

Percentage scale of DC mA measurement

The percentage scale for 4 mA to 20 mA or 0 mA to 20 mA is calculated based on
the measured DC mA value.
1 Select the required range (4 mA to 20 mA or 0 mA to 20 mA) in the Setup
2 Turn the rotary switch to
3 Press
4 Connect the red and black test leads to the positive and negative input
5 Probe the test points in series with the circuit and read the display. The inset
64
mode (refer to Chapter 4, "Setting the percentage scale
to select percentage scale display for DC mA measurement.
terminals respectively.
display in Figure 3-3
in the range of 4 mA to 20 mA.
.
shows the percentage scale reading representing 20 mA
Keysight U1401B User's and Service Guide
readout").