Maintenance-Object Repair Procedures
System Technician-Demanded Tests:
Descriptions and Error Codes
Always investigate tests in the order presented in the table below when inspecting
errors in the system. For example, by clearing error codes associated with the
Configuration audit (#759), you may also clear errors generated from other tests
in the testing sequence.
Order of Investigation
Configuration audit (#759)
Failure audit (#777)
Processor Route audit (#760)
SNC On-Board test (#778)
TPN test (#779)
Switch Node Clock Reset test (#780)
1.
D = Destructive, ND = Nondestructive
See
''SNC-BD (Switch Node Clock Circuit Pack)'' on page 8-1384
of tests and results.
8-1428
Issue 1 May 2002
Short Test
Long Test
Sequence
Sequence
X
X
X
X
X
X
X
X
X
Reset Board
1
Sequence
D/ND
ND
ND
ND
ND
ND
X
D
for descriptions
555-233-143