Troubleshooting light path diagnostic LEDs
OVERSPEC LED lights up
The OVERSPEC LED on the light path diagnostics panel lights up when the power supplies are
using more power than their maximum rating.
Troubleshooting steps
Procedure
1. Check the power-supply LEDs for an error indication. For example, AC LED and DC LED do
not both light up, or the information LED lights up. Replace a failed power supply.
2. Replace the server.
Related Links
Power supply LEDs
LOG LED lights up
The LOG LED on the light path diagnostics panel lights up when an error occurs.
Troubleshooting steps
Procedure
1. If any replaceable components need to be replaced, replace them.
2. If a faulty component is not replaceable, replace the server.
LINK LED lights up
The LINK LED on the light path diagnostics panel is not used.
Troubleshooting steps
Procedure
Ignore unless directed otherwise by Avaya.
PS LED lights up
The PS LED on the light path diagnostics panel lights up when power supply 1 or power supply 2
fails.
May 2014
on page 61
Maintaining the Avaya S8800 2U Server for Message Networking
Comments? infodev@avaya.com
Troubleshooting light path diagnostic LEDs
53