Replacing The Process Hub - ABB IRB 910INV Product Manual

5.3.3 Replacing the process hub

Location of the process hub
The process hub is located as shown in the figure.
xx1800002835
Required spare parts
Spare part
Process hub, B
Process hub, B+C1+A
Process hub, B+C1+C2+A
Outer arm cover, 350 mm
Outer arm cover, 550 mm
Outer arm cover, 350 mm, Clean
Room
Outer arm cove, 550 mm, Clean
Room
Gasket, cover, 350 mm
Gasket, cover, 550 mm
Product manual - IRB 910INV
3HAC068055-001 Revision: K
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the IRB 910INV via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2019-2022 ABB. All rights reserved.
5.3.3 Replacing the process hub
Article number Note
3HAC063756-005
3HAC063756-004
3HAC063756-001
3HAC073058-001
3HAC073066-001
3HAC073230-001 Used with protection type Clean
Room.
3HAC073234-001 Used with protection type Clean
Room.
3HAC066920-001 Replace if damaged.
3HAC066921-001 Replace if damaged.
5 Repair
Continues on next page
189