5 Repair
5.6.9 Replacing the pulley pre-assembly
Continued
Refitting the cover of the outer arm
1
Continues on next page
558
Action
For robots with protection type Clean Room:
Clean the joints that have been opened and wipe
the parts free from particles with spirit on a lint
free. See
Cut the paint or surface on the robot
before replacing parts on page 118
Note
After all repair work, wipe the Clean Room robot
free from particles with spirit on a lint free cloth.
© Copyright 2019-2022 ABB. All rights reserved.
Note
Product manual - IRB 910INV
3HAC068055-001 Revision: K