ABB IRB 910INV Product Manual page 86

3 Installation and commissioning
3.5.2 Customer connections
Continued
Connector kits, outer arm
The table describes the CP/CS and Ethernet (if any) connector kits for the outer
arm.
Position
Connector kits
Protection covers
Protection covers for water and dust proofing
Protection covers are delivered together with the robot and must be well fitted to
the connectors in any application requiring water and dust proofing.
Always remember to refit the protection covers after removing them.
xx1900000149
A
B
C
D
E
i
86
Description
CP/CS M12 CP/CS Male straight connector kits
M12 CP/CS Male angled connector kits
Ethernet M12 Ethernet Cat5e Male straight connect-
or kits
M12 Ethernet Cat5e Male angled connect-
or kits
D A
Protection covers for air hose connector on the base
Protection covers for air hose connector on the process hub
Protection covers for C2/SMB connector on the base and C1/C2 connector on
the process hub
Protection cover for C1 connector on the base
Protection plug for exhaust port connector on the base
Only available for protection type Clean Room.
© Copyright 2019-2022 ABB. All rights reserved.
C
E
B
Product manual - IRB 910INV
3HAC068055-001 Revision: K
Art. no.
3HAC066098-001
3HAC066099-001
3HAC067413-001
3HAC067414-001
i