ABB IRB 910INV Product Manual page 519

Refitting the axis-4 second timing belt
Use these procedures to refit the axis-4 second timing belt.
Refitting the axis-4 second timing belt
1
2
Product manual - IRB 910INV
3HAC068055-001 Revision: K
Action
For robots with protection type Clean Room:
Clean the joints that have been opened and wipe
the parts free from particles with spirit on a lint
free. See Cut the paint or surface on the robot
before replacing parts on page 118
Note
After all repair work, wipe the Clean Room robot
free from particles with spirit on a lint free cloth.
Refit the timing belt to the pulley and the motor.
Ensure that the belt runs correctly in the grooves.
© Copyright 2019-2022 ABB. All rights reserved.
5.6.7 Replacing the axis-4 second timing belt
Note
xx1800002895
Timing belt:
3HAC061864-001
Continues on next page
5 Repair
Continued
519