ABB IRB 910INV Product Manual page 803

xx1900000998
Spare parts
When calibration is not being performed, a protective cover and an o-ring should
always be installed on the fixed calibration pin as well as a protective plug, included
a sealing, in the bushing. Replace damaged parts with new.
Spare part
Protective plug for bushing
O-ring
Calibration pin cover, 10 mm
Product manual - IRB 910INV
3HAC068055-001 Revision: K
6.4.3 Installation locations for the calibration tools
Article number
3HAC059556-001
3HAC061327-022
3HAC056253-003
© Copyright 2019-2022 ABB. All rights reserved.
6 Calibration
Note
Replace if damaged or missing.
Replace if damaged or missing.
Replace if damaged or missing.
Continued
803