ABB IRB 910INV Product Manual page 153

3
4
5
Product manual - IRB 910INV
3HAC068055-001 Revision: K
Action
Disconnect the air hoses from the L-shaped con-
nectors.
For robots with C1 cabling
Disconnect the connector.
• R2.C1
For robots with C2 cabling
Disconnect the connector.
• R1.C2
Tip
Cut the cable straps for the R1.C2 at the same
time.
Tip
Take photos of the connector and cable position
before disconnecting them, to have as a reference
when reconnecting.
Tip
The connector clip has to be pressed (1) and
pushed forward (2) to separate the R1.C2 (for C2
cabling).
xx1800002943
© Copyright 2019-2022 ABB. All rights reserved.
5.3.2 Replacing the internal harness
Note
xx1800002837
xx1900000070
Continues on next page
5 Repair
Continued
153