Inspecting The Bellows - ABB IRB 910INV Product Manual

4 Maintenance

4.5.5 Inspecting the bellows

4.5.5 Inspecting the bellows
Introduction
Location of bellows
The bellows are located as shown in the figures.
xx1900001546
Required spare parts
Spare part
Bellow, 350 mm
Continues on next page
106
CAUTION
Always read the specific instructions if the robot has protection type Clean Room,
before doing any repair work, see
replacing parts on page 118
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the IRB 910INV via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2019-2022 ABB. All rights reserved.
Cut the paint or surface on the robot before
Article number Note
3HAC062062-001
Product manual - IRB 910INV
3HAC068055-001 Revision: K