ABB IRB 910INV Product Manual page 583

Hide thumbs Also See for IRB 910INV:

Table of Contents

Removing the casting cover of the outer arm

Product manual - IRB 910INV

3HAC068055-001 Revision: K

For robots with protection class IP54 (option 3350-

For robots with protection type Clean Room (op-

tion 3351-1)

Loose the locking screws.

For robots with protection class IP54 (option 3350-

For robots with protection type Clean Room (op-

tion 3351-1)

Remove the upper cover from the ball screw.

Make sure that all supplies for electrical power,

hydraulic pressure, and air pressure are turned

For robots with protection type Clean Room

Always cut the paint with a knife and grind the

paint edge when disassembling parts of the robot!

Cut the paint or surface on the robot before

replacing parts on page

5.6.10 Replacing the outer arm

xx1900001547

xx1900001548

Continues on next page

Troubleshooting