4 Maintenance
4.5.6 Inspecting timing belts
Continued
Inspecting timing belts
Use this procedure to inspect timing belts.
1
2
3
4
5
6
112
Action
DANGER
Turn off all:
•
electric power supply
•
hydraulic pressure supply
•
air pressure supply
to the robot, before entering the robot
working area.
Gain access to each timing belt by removing
the cover.
Check the timing belts for damage or wear.
Check the timing belt pulleys for damage.
If any damage or wear is detected, the part
must be replaced!
Use a sonic tension meter to measure the
timing belt tension.
Adjust the belt tension if needed!
© Copyright 2019-2022 ABB. All rights reserved.
Information
See
Timing belt tension on page
Product manual - IRB 910INV
3HAC068055-001 Revision: K
111.