ABB IRB 910INV Product Manual page 221

Hide thumbs Also See for IRB 910INV:

Table of Contents

Refitting the base cover

Product manual - IRB 910INV

3HAC068055-001 Revision: K

For robots with protection type Clean Room:

Clean the joints that have been opened and wipe

the parts free from particles with spirit on a lint

Cut the paint or surface on the robot

before replacing parts on page 118

After all repair work, wipe the Clean Room robot

free from particles with spirit on a lint free cloth.

Apply grease to the internal harness, cover all

moving area of the harness.

Apply grease to the covers that have contacting

area with the harness.

Refit the base cover.

For robots with protection class IP54 (option 3350-

For robots with protection type Clean Room (op-

tion 3351-1)

Check the gasket for the base and the gasket for

the base cover before refitting the base cover.

Replace the gasket if needed.

5.3.4 Replacing the SMB unit and battery unit

xx1800002828

For robots with protection class

IP54 (option 3350-540)

For robots with protection type

Clean Room (option 3351-1)

xx1900001635

Continues on next page

Troubleshooting