ABB IRB 910INV Product Manual page 428

Hide thumbs Also See for IRB 910INV:

Table of Contents

5.6.3 Replacing the pulley on the ball screw upper position

Removing the upper cover

Continues on next page

For robots with protection type Clean Room

Always cut the paint with a knife and grind the

paint edge when disassembling parts of the robot!

Cut the paint or surface on the robot before

replacing parts on page

Make sure that all supplies for electrical power,

hydraulic pressure, and air pressure are turned

For robots with protection type Clean Room

Always cut the paint with a knife and grind the

paint edge when disassembling parts of the robot!

Cut the paint or surface on the robot before

replacing parts on page

For robots with protection class IP54 (option 3350-

For robots with protection type Clean Room (op-

tion 3351-1)

Loose the locking screws.

For robots with protection class IP54 (option 3350-

For robots with protection type Clean Room (op-

tion 3351-1)

Remove the upper cover from the ball screw.

xx1900001547

xx1900001548

Product manual - IRB 910INV

3HAC068055-001 Revision: K

Troubleshooting