Inspection Activities; Inspecting The Information Labels - ABB IRB 930 Product Manual

4.4 Inspection activities

4.4.1 Inspecting the information labels

Location of labels
These figures show the location of the information labels to be inspected. The
symbols are described in section
Required tools and equipment
Visual inspection, no tools are required.
Inspecting, labels
1
2
3
Product manual - IRB 930
3HAC086009-001 Revision: A
Action
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the safeguarded space.
Inspect the labels, located as shown in the figures.
Replace any missing or damaged labels.
© Copyright 2023 ABB. All rights reserved.
4.4.1 Inspecting the information labels
Safety symbols on manipulator labels on page
Note
Article numbers for the labels and
plate set is specified in
parts on page
4 Maintenance
19.
Spare
599.
85