Image Processing Parameter Transfer Setting - FujiFilm CR-IR341 Service Manual

3.8

Image Processing Parameter Transfer Setting

Perform network setting for transferring the image processing parameters from the CL to the
IR. This setting should be made as needed.
If the software version for the CL is A02, image processing parameters are communicated
via the CPU90E board. A network cable should also be connected to the CPU90E board.
"5. Image Processing Parameter Transfer Setting" of "Installation (IN-B) - Connection
with 5000 Series -" in the CR-IR346/348CL Service Manual
009-064-01
08.30.2001 FM3145
CR-IR341P/342P/343P/344P/345P/347P/348RU Service Manual
33
33