Manual Transmission Assembly - Subaru 2002 IMPREZA Service Manual

Hide thumbs Also See for 2002 IMPREZA:
Table of Contents

Advertisement

3. Manual Transmission As-
sembly
A: REMOVAL
1) Open the front hood fully, and support with stay.
2) Disconnect the ground cable from battery.
3) Remove the air intake duct and cleaner case.
(Non-turbo model) <Ref. to IN-7, REMOVAL, Air In-
take Duct.> and <Ref. to IN-6, REMOVAL, Air
Cleaner Case.>
4) Remove the air cleaner case stay. (Non-turbo
model)
5) Remove the intercooler (Turbo model) <Ref. to
IN(TURBO)-10, REMOVAL, Intercooler.>
6) Disconnect the following connectors:
(1) Neutral position switch connector
(2) Back-up light switch connector
(3) High-low switch connector (Dual-range
model)
• Non-turbo MODEL
• Turbo MODEL

MANUAL TRANSMISSION ASSEMBLY

S2M0900
S2M0743
TR0428
MT-33
MANUAL TRANSMISSION AND DIFFERENTIAL
(4) Vehicle speed sensor
7) Remove the snap pin and pin from drive select
cable.
8) Remove the drive select cable on transmission.
(Dual-range model)
(A) Snap pin
(B) Clevis pin
(C) Drive select cable
9) Remove the starter. <Ref. to SC-5, REMOVAL,
Starter.>
10) Remove the operating cylinder from transmis-
sion. (2.0 L and 2.5 L model)
• Non-turbo MODEL
S2M0907
S3M0641A
TR0069

Advertisement

Table of Contents
loading

This manual is also suitable for:

2001 impreza

Table of Contents