Manual Transmission Assembly - Subaru Legacy 2002 Service Manual

3. Manual Transmission
Assembly
S503224
A: REMOVAL
S503224A18
1) Set vehicle on a lift.
2) Open front hood fully, and support with stay.
3) Disconnect battery ground cable.
4) Move shift lever to "N", and release the parking
brake.
5) Remove air intake duct and cleaner case. <Ref.
to IN-6, REMOVAL, Air Cleaner Case.> and <Ref.
to IN-7, REMOVAL, Air Intake Duct.>
6) Remove air cleaner case stay.
7) Disconnect the following connectors.
(1) Neutral position switch connector
(2) Back-up light switch connector
(3) High-low switch connector (Dual-range
model)
(4) Vehicle speed sensor
8) Remove snap pin and pin from the drive select
cable.

MANUAL TRANSMISSION ASSEMBLY

S2M0900
S2M0743
S2M0907
MT-31
Manual Transmission and Differential
9) Remove the drive select cable on the transmis-
sion. (Dual-range model)
(A) Snap pin
(B) Pin
(C) Drive select cable
10) Remove starter. <Ref. to SC-5, REMOVAL,
Starter.>
11) Remove operating cylinder from transmission.
(A) Clutch hose
(B) Operating cylinder
12) Remove pitching stopper.
S2M0745B
B2M1179I
H3M1839