Subaru LEGACY 2006 Manual page 4252

asieps_tobira.book 106 ページ ２００９年１０月２６日 月曜日 午前９時１６分
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)
Step
9 CHECK POOR CONTACT IN CONNECTORS. Is there poor contact in con-
10 CHECK THE VDCCM&H/U.
1) Connect all the connectors.
2) Erase the memory.
3) Perform the Inspection Mode.
4) Read the DTC.
11 CHECK OTHER DTC DETECTION.
Check
nector between VDCCM& H/U
and yaw rate & lateral G sen-
sor?
Is the same DTC displayed?
Is any other DTC displayed?
VDC(diag)-106
Yes No
Repair the con- Go to step 10.
nector.
Replace the Go to step 11.
VDCCM&H/U.
<Ref. to VDC-7,
VDC Control Mod-
ule and Hydraulic
Control Unit
(VDCCM&H/U).>
Perform the diag- Temporary poor
nosis according to contact occurs.
DTC.