Manual Transmission Assembly - Subaru Legacy 2004 Service Manual

3. Manual Transmission As-
sembly
A: REMOVAL
1) Open the front hood fully, and support with stay.
2) Disconnect the ground cable from battery.
3) Drain transmission gear oil completely.
4) Remove the air intake chamber and air cleaner
case. <Ref. to IN(H4SO 2.0)-8, REMOVAL, Air In-
take Chamber.> <Ref. to IN(H4SO 2.0)-6, REMOV-
AL, Air Cleaner Case.>
5) Remove the air intake chamber stay.
6) Disconnect the following connectors:
(1) Neutral position switch connector
(2) Back-up light switch connector
(3) High-low switch connector (Dual-range
model)
7) Remove the snap pin and clevis pin from drive
select cable. (Dual-range model)

Manual Transmission Assembly

MT-00062
MT-00063
5MT-31
MANUAL TRANSMISSION AND DIFFERENTIAL
8) Remove the drive select cable on transmission
side. (Dual-range model)
( C )
( B )
(A) Snap pin
(B) Clevis pin
(C) Drive select cable
9) Remove the starter. <Ref. to SC(H4SO 2.0)-6,
REMOVAL, Starter.>
10) Remove the operating cylinder from transmis-
sion.
11) Remove the pitching stopper.
( A )
MT-00066
CL-00253
MT-00069