SSANGYONG Y200
DISASSEMBLY PROCEDURE
Shift Motor Assembly
1. Separate the harness bracket.
2. Remove the shift motor mounting bolt and remove
the shift motor assembly.
YAD5D380
Companion Flange
1. Holding the companion flange, remove the nut and
washer and then remove the companion flange.
2. Remove the oil seal.
3. Remove the companion flange from the case
cover.
YAD5D390
Case Cover Assembly
1. Remove the cover mounting bolts(9), and the case
mounting bolts(5).
Notice: Identification tag has information required
for ordering replacement parts, so be careful not
to lose it.
2. Using a driver, pry and disconnect the sealant
bond of the cover and required case.
YAD5D400
YAD5D410
PART TIME - T/C 5D1-25
UNIT REPAIR