2005 CELICA (RM1131U)
AIR CONDITIONING
−
AIR CONDITIONING UNIT
INSTALLATION
Installation is in the reverse order of removal (See page
AC−26).
HOWEVER, NOTE THAT THE FOLLOWING PROCEDURES
SHOULD BE SURELY CONDUCTED
(a)
Remove the joint of the heater outlet hose from the heater
pipe.
HINT:
Do not detach the other joint on the engine side.
(b)
Hold the removed heater hose with the end facing up,
pour LLC into the hose.
(c)
Pour LLC until it flows into the reverse tank from the hose
at the bottom.
(d)
When this happens, stop pouring and reinstall the heater
hose to the heater pipe.
(e)
Perform air bleeding in the same manner when LLC is re-
placed (See page CO−2).
HINT:
I14017
Note that the amount of LLC removed from the heater parts
should be added.
Additional amount (example):
Heater core: approx. 350 cc
Heater pipe: approx. 200 cc
Heater hose: approx. 70 cc
2452
AC−29
AC2H0−02