Table of Contents
Advertisement
3
Performance Quick Check
44
12 Select the OO measurement tab.
13 Set the following parameters:
•
If you have option 102 (Dual wavelength 1310 nm, 1550 nm), select
the appropriate wavelength for your DUTs.
•
Laser power: -1 dBm
•
Optical input: Input 1
•
User Calibration: None
•
Forward RF Power: 0 dBm
14 Click
, then
15 Press
to start optical power meter application.
16 Read the optical power from the power meter application.
The readout should be -1 dBm ± 0. 5 dB
17 If you have option -301 and -021:
Connect the straight-angled optical patch cord (N4373-87907) to the
optical output of an external laser, with 1310 nm or 1550 nm
wavelength and known output power, and input of the LCA Optical
Receiver. Note that the angled connector must be attached to the
optical test set.
Keysight N4372E Lightwave Component Analyzer User's Guide
to set the output power.
Advertisement
Table of Contents
