Launching Modular SA Application
Application Launcher
Application Launcher
CXA-m Launcher is a tool for invoking the Modular SA applications for one or
multiple modules. It also can be used to update the FPGA and install module
hardware license.
Before launching any application, M9290A module should be installed into the
chassis.
Start Launcher
Please click
eset/
start Launcher from the desktop, or start it from Windows Start >
All Programs > Keysight Signal Analysis > LaunchModularSA.
Database Maintenance
After Launcher starting, it will check the free space on controller drive C: first. If
there is not enough free space on drive C:, a message box will pop up to delete the
database for all uninstalled modules as following:
Choose "Yes" to delete the database for the modules which are unplugged from
chassis. A notification as following will be shown when launcher is removing the
database for the uninstalled modules:
After database removing, if the free space is still not enough, a message box will pop
up as following to remind user to clean the disk space manually:
Then, launcher will create database for the newly installed module which does not
have database.
37