Information Display (Clock) Removal And Installation; Audio Unit Removal And Installation (If Equipped); Front Speaker Removal And Installation (If Equipped) - Suzuki SX4 Service Manual

9C-20 Instrumentation / Driver Info. / Horn:
Information Display (Clock) Removal and
Installation
Removal
1) Remove audio unit referring to "Audio Unit Removal
and Installation (If Equipped)".
2) Remove center ventilation louver (1) from instrument
panel and then disconnect hazard switch connector.
3) Remove information display (clock) (1) from
instrument panel (2) pulling it in arrow direction
shown in figure.
4) Disconnect information display coupler.
2
Installation
Reverse removal procedure.
Audio Unit Removal and Installation (If
Equipped)
Removal
1) Disconnect negative (–) cable at battery.
2) Remove instrument panel center garnish trims (1).
1
S7RW0A9306016
1
I5RW0A930018-01
1
I5RW0A930019-01
S7RW0A9306017
I5RW0A930020-03
3) Remove 4 mounting screws (1).
4) Disconnect electrical connectors from audio unit.
5) Remove audio unit (2) from instrument panel.
2
Installation
Reverse removal procedure.
Front Speaker Removal and Installation (If
Equipped)
Removal
1) Remove front door trim referring to Step 1) to 3) of
"Front Door Glass Removal and Installation in
Section 9E".
2) Remove 3 front speaker mounting screws (1).
3) Remove front speaker (2) from front door panel (3).
4) Disconnect front speaker coupler from front speaker
(2).
2
Installation
Reverse removal procedure.
1
I5RW0A930021-01
S7RW0A9306018
1
3
I4RS0A930027-01