Debug Isdp; Debug Lacp - Dell PowerConnect 8024 Cli Reference Manual

Usage Guidelines
There are no usage guidelines for this command.
Example
console#debug ipv6 pimsm packet

debug isdp

Use the debug isdp command to trace ISDP packet reception and transmission. The receive
option traces only received ISDP packets and the transmit option traces only transmitted ISDP
packets. When neither keyword is used in the command, then all ISDP packet traces are
dumped. Vital information such as source address, destination address, control packet type,
packet length, and the interface on which the packet is received or transmitted is displayed on
the console. Use the "no" form of this command to disable ISDP tracing.
Syntax
debug isdp packet [ receive | transmit ]
no debug isdp packet [ receive | transmit ]
Default Configuration
Display of ISDP traces is disabled by default.
Command Mode
Privileged EXEC mode.
Usage Guidelines
There are no usage guidelines for this command.
Example
console#debug isdp packet

debug lacp

Use the debug lacp command to enable tracing of LACP packets received and transmitted by
the switch. Use the "no" form of this command to disable tracing of LACP packets.
Syntax
debug lacp packet
no debug lacp packet
1002
Serviceability Tracing Packet Commands