2922
Community A1
Static configuration:
PVID: 2922
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
GVRP status: Disabled
Port 2/0/19 is member in:
VLAN
Name
----
---------
2921
Primary A
2922
Community A1
show port protocol
Use the show port protocol command in Privileged EXEC mode to display
the Protocol-Based VLAN information for either the entire system or for the
indicated group.
Syntax
show port protocol {
groupid — The protocol-based VLAN group ID, which is automatically
•
generated when you create a protocol-based VLAN group with the vlan
protocol group command.
•
all — Enter all to show all interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the Protocol-Based VLAN information for
either the entire system.
console#show port protocol all
untagged
Egress rule
-----------
untagged
untagged
groupid
| all}
Static
Type
-----
Static
Static
VLAN Commands
811