Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
GVRP status: Disabled
Port 2/g19 is member in:
VLAN
Name
----
---------
2921
Primary A
2922
Community A1
show port protocol
Use the show port protocol command in Privileged EXEC mode to display the Protocol-Based
VLAN information for either the entire system or for the indicated group.
Syntax
groupid
show port protocol {
groupid — The protocol-based VLAN group ID, which is automatically generated when you
•
create a protocol-based VLAN group with the vlan protocol group command.
all — Enter all to show all interfaces.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the Protocol-Based VLAN information for either the entire
system.
console#show port protocol all
Group Name
---------------
Egress rule
-----------
untagged
untagged
| all}
Group
ID
Protocol(s
-----
----------
Type
-----
Static
Static
VLAN
Interface(s)
----
------------------------
VLAN Commands
503