Ip Scp Topdir - Dell S6000 Reference Manual

pre-Version
6.1.1.0
Usage Debug information includes details for key-exchange, authentication, and
Information established session for each connection.

ip scp topdir

Identify a location for files used in secure copy transfer.
S6000
Syntax
ip scp topdir directory
To return to the default setting, use the no ip scp topdir command.
Parameters
directory
Defaults The internal flash (flash:) is the default directory.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage To configure the switch as an SCP server, use the ip ssh server command.
Information
Related ip ssh server
Commands
1282
Introduced on the E-Series.
Enter a directory name.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— enables the SSH and SCP server on the switch.
Security