Login Authentication - Dell S6000 Reference Manual

Related
show running-config
Commands
privilege level (CONFIGURATION mode)
modes within the switch.

login authentication

To designate the terminal lines, apply an authentication method list.
S6000
Syntax
login authentication {method-list-name | default}
To use the local user/password database for login authentication, use the no
login authentication command.
Parameters
method-list-
name
default
Defaults No authentication is performed on the console lines. Local authentication is
performed on the virtual terminal and auxiliary lines.
Command LINE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.0
Usage If you configure the aaa authentication login default command, the
Information
login authentication default command automatically is applied to all
terminal lines.
1240
— views the current configuration.
— controls access to the command
Enter the keywords method-list-name to specify that
method list, created in the aaa authentication login
command, to be applied to the designated terminal line.
Enter the keyword default to specify that the default
method list, created in the aaa authentication login
command, is applied to the terminal line.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Security