:SAVE:POWer[:STARt]
Command Syntax
:SAVE:POWer[:STARt] [<file_name>]
<file_name> ::= quoted ASCII string
The :SAVE:POWer[:STARt] command saves the power measurement
application's current harmonics analysis results to a file.
If a file extension is provided as part of a specified <file_name>, it must be ".csv".
N O T E
See Also
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see
page
1208)
"Introduction to :SAVE Commands"
":SAVE:FILename"
on page 626
Chapter
25, ":POWer Commands," starting on page 547
:SAVE Commands
on page 623
27
635