Measure:real - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:MEASure:REAL

Command Syntax
:MEASure:REAL [<source>]
<source> ::= {CHANnel<n>| FUNCtion<m> | MATH<m>}
<n> ::= 1 to (# analog channels) in NR1 format
<m> ::= 1-4 in NR1 format
The :MEASure:REAL command installs a real power measurement on
screen.
The <source> parameter is typically a math multiply waveform or other
waveform that represents power (voltage * current). This source can also
be specified by the :MEASure:SOURce command.
Real power is a measure of power quality. It is the portion of power flow
that, averaged over a complete cycle of the AC waveform, results in net
transfer of energy in one direction.
Query Syntax
:MEASure:REAL? [<source>]
The :MEASure:REAL query returns the measured real power.
Return Format
<return_value><NL>
<return_value> ::= the real power value in NR3 format
See Also •
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
":MEASure:SOURce"
":POWer:QUALity:APPLy"
on page 458
on page 579
:MEASure Power Commands
22
503