Function<M>:Scale - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:FUNCtion<m>:SCALe
Command Syntax
:FUNCtion<m>:SCALe <scale value>[<suffix>]
<m> ::= 1-4 in NR1 format
<scale value> ::= integer in NR1 format
<suffix> ::= {V | dB}
The :FUNCtion<m>:SCALe command sets the vertical scale, or units per
division, of the selected function. Legal values for the scale depend on the
selected function.
Query Syntax
:FUNCtion<m>:SCALe?
The :FUNCtion<m>:SCALe? query returns the current scale value for the
selected function.
Return Format
<scale value><NL>
<scale value> ::= integer in NR1 format
See Also
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
"Introduction to :FUNCtion<m> Commands"
":FUNCtion<m>:RANGe" on page 361
:FUNCtion<m> Commands
on page 340
17
363