17
:FUNCtion<m> Commands
:FUNCtion<m>:BUS:YINCrement
Command Syntax
:FUNCtion<m>:BUS:YINCrement <value>
<m> ::= 1-4 in NR1 format
<value> ::= value per bus code, in NR3 format
The :FUNCtion<m>:BUS:YINCrement command specifies the value
associated with each increment in Chart Logic Bus data.
Query Syntax
:FUNCtion<m>:BUS:YINCrement?
The :FUNCtion<m>:BUS:YINCrement query returns the value associated
with each increment in Chart Logic Bus data.
Return Format
<value><NL>
<value> ::= value per bus code, in NR3 format
See Also
•
344
(see
page
1208)
":FUNCtion<m>:OPERation"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 358