Save:waveform:format - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:SAVE:WAVeform:FORMat

Command Syntax
:SAVE:WAVeform:FORMat <format>
<format> ::= {ASCiixy | CSV | BINary}
The :SAVE:WAVeform:FORMat command sets the waveform data format
type:
• ASCiixy — creates comma- separated value files for each analog channel
• CSV — creates one comma- separated value file that contains
• BINary — creates an oscilloscope binary data format file. See the User's
Query Syntax
:SAVE:WAVeform:FORMat?
The :SAVE:WAVeform:FORMat? query returns the selected waveform data
format type.
Return Format
<format><NL>
<format> ::= {ASC | CSV | BIN | NONE}
When NONE is returned, it indicates that an image file format is currently
selected.
See Also
•
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
that is displayed (turned on). The proper file extension for this format
is ".csv".
information for all analog channels that are displayed (turned on). The
proper file extension for this format is ".csv".
Guide for a description of this format. The proper file extension for this
format is ".bin".
"Introduction to :SAVE Commands"
":SAVE:WAVeform[:STARt]"
":SAVE:WAVeform:LENGth"
":SAVE:IMAGe:FORMat"
on page 623
on page 638
on page 640
on page 629
27
:SAVE Commands
639