Search:transition:qualifier - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

29
:SEARch Commands

:SEARch:TRANsition:QUALifier

Command Syntax
:SEARch:TRANsition:QUALifier <qualifier>
<qualifier> ::= {GREaterthan | LESSthan}
The :SEARch:TRANsition:QUALifier command specifies whether to search
for edge transitions greater than or less than a time.
Query Syntax
:SEARch:TRANsition:QUALifier?
The :SEARch:TRANsition:QUALifier? query returns the current transition
search qualifier.
Return Format
<qualifier><NL>
<qualifier> ::= {GRE | LESS}
See Also
•
•
•
838
(see page 1208)
Chapter 29, ":SEARch Commands," starting on page 817
":SEARch:MODE" on page 820
":SEARch:TRANsition:TIME"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 841