Demo:function:phase:phase - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

12
:DEMO Commands

:DEMO:FUNCtion:PHASe:PHASe

Command Syntax
:DEMO:FUNCtion:PHASe:PHASe <angle>
<angle> ::= angle in degrees from 0 to 360 in NR3 format
For the phase shifted sine demo signals, the
:DEMO:FUNCtion:PHASe:PHASe command specifies the phase shift in the
second sine waveform.
Query Syntax
:DEMO:FUNCtion:PHASe:PHASe?
The :DEMO:FUNCtion:PHASe:PHASe? query returns the currently set phase
shift.
Return Format
<angle><NL>
<angle> ::= angle in degrees from 0 to 360 in NR3 format
See Also
•
•
298
(see page 1208)
"Introduction to :DEMO Commands"
":DEMO:FUNCtion" on page 294
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 293