Sbus<N>:Spi:bitorder - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

28
:SBUS<n> Commands
:SBUS<n>:SPI:BITorder
Command Syntax
:SBUS<n>:SPI:BITorder <order>
<order> ::= {LSBFirst | MSBFirst}
The :SBUS<n>:SPI:BITorder command selects the bit order, most significant
bit first (MSB) or least significant bit first (LSB), used when displaying
data in the serial decode waveform and in the Lister.
Query Syntax
:SBUS<n>:SPI:BITorder?
The :SBUS<n>:SPI:BITorder? query returns the current SPI decode bit
order.
Return Format
<order><NL>
<order> ::= {LSBF | MSBF}
Errors
•
See Also •
•
•
756
(see page 1208)
"- 241, Hardware missing"
"Introduction to :SBUS<n> Commands"
":SBUS<n>:MODE" on page 649
":SBUS<n>:SPI Commands"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 1169
on page 645
on page 754