Sbus<N>:Usb:trigger:crc - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

28
:SBUS<n> Commands
:SBUS<n>:USB:TRIGger:CRC
Command Syntax
:SBUS<n>:USB:TRIGger:CRC <string>
<string> ::= "nnnnn" where n ::= {0 | 1 | X}
<string> ::= "0xnn" where n ::= {0,..,9 | A,..,F | X | $}
The :SBUS<n>:USB:TRIGger:CRC command specifies the CRC portion of the
trigger for the selected bus, in binary or hex.
Query Syntax
:SBUS<n>:USB:TRIGger:CRC?
The :SBUS<n>:USB:TRIGger:CRC? query returns the specified CRC portion
of the trigger.
Return Format
<string><NL>
<string> ::= "nnnnn" where n ::= {0 | 1 | X}
See Also •
•
802
(see page 1208)
":SBUS<n>:USB:TRIGger:PID:SPECial"
":SBUS<n>:USB:TRIGger:PID:TOKen"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 812
on page 813