Save:multi[:Start] - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

27
:SAVE Commands

:SAVE:MULTi[:STARt]

Command Syntax
:SAVE:MULTi[:STARt] [<file_name>]
<file_name> ::= quoted ASCII string
The :SAVE:MULTi[:STARt] command saves multi- channel waveform data to
a file. This file can be opened by the N8900A InfiniiView oscilloscope
analysis software.
If a file extension is provided as part of a specified <file_name>, it must be ".h5".
N O T E
See Also
•
•
•
634
(see page 1208)
"Introduction to :SAVE Commands"
":SAVE:FILename" on page 626
":SAVE:PWD" on page 636
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 623