Wgen<W>:Arbitrary:data - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

34
:WGEN<w> Commands
:WGEN<w>:ARBitrary:DATA
Command Syntax
:WGEN<w>:ARBitrary:DATA {<binary> | <value>, <value> ...}
<w> ::= 1 or 2 in NR1 format
<binary> ::= floating point values between -1.0 to +1.0
<value> ::= floating point values between -1.0 to +1.0
The :WGEN<w>:ARBitrary:DATA command downloads an arbitrary
waveform in floating- point values format.
See Also •
•
•
1060
(see page 1208)
in IEEE 488.2 binary block format
in comma-separated format
":WGEN<w>:ARBitrary:DATA:DAC"
":SAVE:ARBitrary[:STARt]"
":RECall:ARBitrary[:STARt]"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 1063
on page 624
on page 615